# shellcheck shell=bash
# Shared helpers for taler-monitoring (laptop or koopa).

# Default stack = GOA / hacktivism (overridden by TALER_DOMAIN / --domain)
# i18n (en default; fr for FrancPaysan — see i18n.sh / TALER_MON_LANG)
_I18N_DIR=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
if [ -f "$_I18N_DIR/i18n.sh" ]; then
  # shellcheck source=i18n.sh
  source "$_I18N_DIR/i18n.sh"
  i18n_init
else
  i18n_tag() { printf '%s' "$1"; }
  i18n_text() { printf '%s' "$*"; }
  i18n_init() { :; }
fi

: "${TALER_DOMAIN:=hacktivism.ch}"
: "${BANK_PUBLIC:=https://bank.hacktivism.ch}"
: "${EXCHANGE_PUBLIC:=https://exchange.hacktivism.ch}"
: "${MERCHANT_PUBLIC:=https://taler.hacktivism.ch}"
: "${BANK_LOCAL:=http://127.0.0.1:9012}"
: "${EXCHANGE_LOCAL:=http://127.0.0.1:9011}"
: "${MERCHANT_LOCAL:=https://127.0.0.1:9010}"
: "${LANDING_LOCAL:=http://127.0.0.1:9013}"
: "${KOOPA_SSH:=koopa}"
# When LAN Host "koopa" is unreachable, try WAN DNAT (see ~/.ssh/config Host koopa-external).
: "${KOOPA_SSH_FALLBACKS:=koopa-external}"
: "${MERCHANT_INSTANCE:=goa-demo-cp4zqk}"
# Merchant portal /private API: instance ids must be lowercase or you get odd 401s.
# (Display names may use capitals; path segment /instances/{id}/ must not.)
MERCHANT_INSTANCE=$(printf '%s' "${MERCHANT_INSTANCE}" | tr '[:upper:]' '[:lower:]')
: "${WITHDRAW_AMT:=GOA:20}"   # single-shot fallback; e2e ladder uses ATM notes
: "${PAY_AMT:=GOA:0.01}"
: "${CREDIT_AMT:=GOA:4700}"  # covers ATM ladder 20+50+100+200+4200 (paivana)
: "${TIMEOUT:=12}"
: "${E2E_TIMEOUT:=55}"       # whole e2e budget; skip rest when exceeded (e2e raises as needed)
: "${E2E_PAY_SECS:=22}"      # dedicated seconds for pay handle-uri (avoid Alarm clock)
# Whole-run wall clock for taler-monitoring.sh (seconds). 0 = unlimited.
# Host-agent default phases (urls/inside/versions) should finish under this.
: "${RUN_TIMEOUT:=600}"
# Local GOA: public paivana paywall (https://paivana.hacktivism.ch · template GOA:4200)
: "${PAIVANA_PUBLIC:=https://paivana.hacktivism.ch}"
: "${E2E_PAIVANA:=1}"        # 0 = skip paivana section in e2e
# Devtest: inject reserve credit via wire-gateway admin/add-incoming (optional).
# Default off once wirewatch DNS works; set E2E_FAKE_INCOMING=1 to force.
: "${E2E_FAKE_INCOMING:=0}"
# SSH must never hang the monitoring run
: "${SSH_CONNECT_TIMEOUT:=3}"
: "${SSH_CMD_TIMEOUT:=12}"   # hard cap for whole remote script (seconds)
: "${SKIP_SSH:=0}"
# Expected currency for public /config checks (empty = report only, don't fail)
# Only if unset (not if intentionally empty = pre-launch / report-only)
: "${EXPECT_CURRENCY=GOA}"
# 1 = this is the local koopa/hacktivism stack (inside/e2e/SSH make sense)
: "${LOCAL_STACK:=1}"
# Probe merchant host candidates when applying a generic domain (0=off)
: "${TALER_DOMAIN_PROBE:=1}"

BANK_PUBLIC=${BANK_PUBLIC%/}
EXCHANGE_PUBLIC=${EXCHANGE_PUBLIC%/}
MERCHANT_PUBLIC=${MERCHANT_PUBLIC%/}

# ---------------------------------------------------------------------------
# Domain profiles → bank / exchange / merchant base URLs
#
# Single place to declare a stack: domains.conf (suite root)
# (or TALER_DOMAINS_CONF). Each profile names the three public endpoints.
#
# CLI still wins after profile load:
#   --bank URL  --exchange URL  --merchant URL  --currency CODE
# Env: BANK_PUBLIC EXCHANGE_PUBLIC MERCHANT_PUBLIC EXPECT_CURRENCY
#
# Unknown domains fall back to heuristics (see apply_taler_domain).
# ---------------------------------------------------------------------------

_MONITOR_LIB_DIR=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
: "${TALER_DOMAINS_CONF:=${_MONITOR_LIB_DIR}/domains.conf}"

# host_or_url → https://… (no trailing slash)
_to_https_base() {
  local x="${1%/}"
  case "$x" in
    https://*|http://*) printf '%s' "$x" ;;
    "") printf '' ;;
    *) printf 'https://%s' "$x" ;;
  esac
}

# 1 = check GOA-style /intro landing pages (assets, link crawl, demo-withdraw).
# 0 = skip (e.g. taler-ops.ch / mytops — no public landings).
: "${CHECK_LANDING:=1}"

# Declare bank + exchange + merchant (+ currency, local stack, landing, domain id).
# Usage:
#   set_taler_stack BANK EXCHANGE MERCHANT [CURRENCY] [LOCAL 0|1] [LANDING 0|1] [TALER_DOMAIN]
# BANK/EXCHANGE/MERCHANT: hostname or full URL
set_taler_stack() {
  local bank="${1:-}" exchange="${2:-}" merchant="${3:-}"
  local currency="${4:-}" local_stack="${5:-0}" landing="${6:-}" domain_id="${7:-}"

  BANK_PUBLIC=$(_to_https_base "$bank")
  EXCHANGE_PUBLIC=$(_to_https_base "$exchange")
  MERCHANT_PUBLIC=$(_to_https_base "$merchant")
  # currency "-" or empty → report-only (do not force GOA)
  if [ -n "$currency" ] && [ "$currency" != "-" ]; then
    EXPECT_CURRENCY="$currency"
  elif [ "$currency" = "-" ]; then
    EXPECT_CURRENCY=""
  fi
  LOCAL_STACK="$local_stack"
  if [ "$LOCAL_STACK" = "1" ]; then
    SKIP_SSH=0
  else
    SKIP_SSH=1
  fi
  # default: landings only matter on local GOA stack
  if [ -n "$landing" ]; then
    CHECK_LANDING="$landing"
  elif [ "$LOCAL_STACK" = "1" ]; then
    CHECK_LANDING=1
  else
    CHECK_LANDING=0
  fi
  [ -n "$domain_id" ] && TALER_DOMAIN="$domain_id"

  BANK_PUBLIC=${BANK_PUBLIC%/}
  EXCHANGE_PUBLIC=${EXCHANGE_PUBLIC%/}
  MERCHANT_PUBLIC=${MERCHANT_PUBLIC%/}
  # re-evaluate language after domain profile (FrancPaysan → fr)
  if [ "${TALER_MON_LANG_SET:-0}" != "1" ]; then
    TALER_MON_LANG=
    i18n_init
  fi
}

# Load first matching profile from domains.conf.
# Fields (whitespace-separated; # comments; blank lines ignored):
#   name  bank  exchange  merchant  currency  local[0|1]  landing[0|1]  [canonical_domain]
# Returns 0 if found, 1 if not.
load_domain_profile() {
  local want="$1" conf="${TALER_DOMAINS_CONF:-}"
  local line name bank exchange merchant currency local_stack landing canon
  [ -n "$want" ] || return 1
  [ -n "$conf" ] && [ -f "$conf" ] || return 1

  while IFS= read -r line || [ -n "$line" ]; do
    line="${line%%#*}"
    # shellcheck disable=SC2086
    set -- $line
    [ $# -ge 5 ] || continue
    name="$1"
    [ "$name" = "$want" ] || continue
    bank="$2"
    exchange="$3"
    merchant="$4"
    currency="$5"
    local_stack="${6:-0}"
    landing="${7:-}"
    canon="${8:-$name}"
    # Backward compat: old 7th field was canonical domain (contains a dot)
    if [ -n "$landing" ] && [[ "$landing" == *.* && "$landing" != "0" && "$landing" != "1" ]]; then
      canon="$landing"
      landing=""
    fi
    set_taler_stack "$bank" "$exchange" "$merchant" "$currency" "$local_stack" "$landing" "$canon"
    return 0
  done <"$conf"
  return 1
}

_normalize_domain() {
  local d="$1"
  d="${d#https://}"
  d="${d#http://}"
  d="${d%%/*}"
  d="${d%%:*}"
  # Strip service host prefix only if a real domain remains (has a dot).
  # e.g. bank.demo.taler.net → demo.taler.net, taler.hacktivism.ch → hacktivism.ch
  # but NOT taler.net → net
  case "$d" in
    bank.*|exchange.*|taler.*|backend.*|merchant.*|shop.*|libeufin.*|my.*|map.*|monnaie.*)
      rest="${d#*.}"
      if [[ "$rest" == *.* ]]; then
        d="$rest"
      fi
      ;;
  esac
  printf '%s' "$d"
}

_probe_https_config() {
  # 0 if https://$1/config returns 200
  local host="$1" code
  code=$(curl -skS --max-redirs 0 -m 4 -o /dev/null -w '%{http_code}' "https://${host}/config" 2>/dev/null || echo 000)
  [ "$code" = "200" ]
}

apply_taler_domain() {
  local raw="${1:-}"
  local d
  [ -n "$raw" ] || return 0
  d=$(_normalize_domain "$raw")
  TALER_DOMAIN="$d"

  # 1) Explicit profile (domains.conf) — preferred way to add stacks
  if load_domain_profile "$d" || load_domain_profile "$raw"; then
    # Optional tiny defaults for e2e ladders by currency
    case "${EXPECT_CURRENCY:-}" in
      GOA)
        : "${WITHDRAW_AMT:=GOA:20}"
        : "${PAY_AMT:=GOA:0.01}"
        : "${CREDIT_AMT:=GOA:400}"
        ;;
      KUDOS|TESTKUDOS)
        MERCHANT_INSTANCE="${MERCHANT_INSTANCE:-sandbox}"
        WITHDRAW_AMT="${WITHDRAW_AMT:-${EXPECT_CURRENCY}:20}"
        PAY_AMT="${PAY_AMT:-${EXPECT_CURRENCY}:0.01}"
        CREDIT_AMT="${CREDIT_AMT:-${EXPECT_CURRENCY}:100}"
        ;;
      TESTPAYSAN)
        # Stage FrancPaysan: farmer shops (override GOA default goa-demo-cp4zqk)
        case "${MERCHANT_INSTANCE:-}" in
          ""|goa-demo*|goa-shop)
            MERCHANT_INSTANCE=fermes-des-collines
            ;;
        esac
        MERCHANT_INSTANCE=$(printf '%s' "${MERCHANT_INSTANCE}" | tr '[:upper:]' '[:lower:]')
        WITHDRAW_AMT="${WITHDRAW_AMT:-TESTPAYSAN:50}"
        PAY_AMT="${PAY_AMT:-TESTPAYSAN:5}"
        # Cover oeufs(5)+fromage(8.5)+jus(6)+shop pick(~5–12) + fees
        CREDIT_AMT="${CREDIT_AMT:-TESTPAYSAN:200}"
        # Public template pays on by default (shops landings)
        : "${E2E_USE_TEMPLATES:=1}"
        # Map pay-ladder amounts → public shop templates (instance set in e2e)
        : "${E2E_TEMPLATE_MAP:=5=oeufs-6 4.5=pain-seigle 6=jus-pomme 8.5=fromage-chevre 12=miel-printemps 25=panier-legumes}"
        : "${E2E_PAY_VALUES:=5 8.5 6}"
        : "${E2E_WITHDRAW_VALUES:=20 50}"
        # Inside checks as low-priv stagepaysan (podman, no sudo) — not koopa
        INSIDE_PROFILE="${INSIDE_PROFILE:-stage-lfp}"
        INSIDE_SSH="${INSIDE_SSH:-francpaysan-stage-user}"
        INSIDE_BANK_CTR="${INSIDE_BANK_CTR:-stage-lfp-bank}"
        INSIDE_EXCHANGE_CTR="${INSIDE_EXCHANGE_CTR:-stage-lfp-exchange-ansible}"
        INSIDE_MERCHANT_CTR="${INSIDE_MERCHANT_CTR:-stage-lfp-merchant}"
        # Host pasta ports (127.0.0.1 on francpaysan-host)
        INSIDE_BANK_PORT="${INSIDE_BANK_PORT:-9032}"
        INSIDE_EXCHANGE_PORT="${INSIDE_EXCHANGE_PORT:-9031}"
        INSIDE_MERCHANT_PORT="${INSIDE_MERCHANT_PORT:-9030}"
        INSIDE_DNS_BANK="${INSIDE_DNS_BANK:-stage.bank.lefrancpaysan.ch}"
        INSIDE_DNS_EXCHANGE="${INSIDE_DNS_EXCHANGE:-stage.exchange.lefrancpaysan.ch}"
        INSIDE_DNS_MERCHANT="${INSIDE_DNS_MERCHANT:-stage.monnaie.lefrancpaysan.ch}"
        ;;
      CHF)
        WITHDRAW_AMT="${WITHDRAW_AMT:-CHF:20}"
        PAY_AMT="${PAY_AMT:-CHF:0.01}"
        CREDIT_AMT="${CREDIT_AMT:-CHF:100}"
        ;;
    esac
  else
    # 2) Unknown domain — heuristics only (prefer profile in domains.conf)
    #    Override: --bank / --exchange / --merchant / --currency
    #    Do not keep default GOA: empty currency = report only, no hard fail.
    BANK_PUBLIC="https://bank.${d}"
    EXCHANGE_PUBLIC="https://exchange.${d}"
    # TOPS-style multi-tenant merchant first, then legacy names
    MERCHANT_PUBLIC="https://my.${d}"
    EXPECT_CURRENCY=""
    LOCAL_STACK=0
    SKIP_SSH=1
    CHECK_LANDING=0
    if [ "${TALER_DOMAIN_PROBE}" = "1" ]; then
      local h
      for h in "monnaie.${d}" "backend.${d}" "my.${d}" "taler.${d}" "merchant.${d}" "shop.${d}"; do
        _probe_https_config "$h" && { MERCHANT_PUBLIC="https://$h"; break; }
      done
      for h in "bank.${d}" "libeufin.${d}"; do
        _probe_https_config "$h" && { BANK_PUBLIC="https://$h"; break; }
      done
      _probe_https_config "exchange.${d}" || true
    fi
  fi

  BANK_PUBLIC=${BANK_PUBLIC%/}
  EXCHANGE_PUBLIC=${EXCHANGE_PUBLIC%/}
  MERCHANT_PUBLIC=${MERCHANT_PUBLIC%/}
  # re-evaluate language after domain profile (FrancPaysan → fr)
  if [ "${TALER_MON_LANG_SET:-0}" != "1" ]; then
    TALER_MON_LANG=
    i18n_init
  fi

  # Koopa SSH only for LOCAL_STACK=1. Stage LFP uses INSIDE_SSH (stagepaysan) separately.
  if [ "${LOCAL_STACK}" != "1" ]; then
    SKIP_SSH=1
  fi
  # Default inside profile for local GOA
  if [ "${LOCAL_STACK}" = "1" ]; then
    INSIDE_PROFILE="${INSIDE_PROFILE:-koopa}"
  fi
}

# Apply TALER_DOMAIN from env once (CLI exports TALER_DOMAIN_APPLIED=1 after overrides).
if [ "${TALER_DOMAIN_APPLIED:-0}" != "1" ] \
  && [ -n "${TALER_DOMAIN:-}" ] && [ "${TALER_DOMAIN}" != "hacktivism.ch" ]; then
  apply_taler_domain "$TALER_DOMAIN"
  TALER_DOMAIN_APPLIED=1
fi

# Safe SSH: publickey only, short connect, overall alarm so we never block forever.
SSH_BASE_OPTS=(
  -o BatchMode=yes
  -o ConnectTimeout="${SSH_CONNECT_TIMEOUT}"
  -o ConnectionAttempts=1
  -o ServerAliveInterval=3
  -o ServerAliveCountMax=2
  -o StrictHostKeyChecking=accept-new
  -o PreferredAuthentications=publickey
  -o PasswordAuthentication=no
  -o KbdInteractiveAuthentication=no
  -o GSSAPIAuthentication=no
  -o NumberOfPasswordPrompts=0
)

# Hard wall-clock timeout so ssh/curl never block the monitoring run forever.
with_timeout() {
  local secs="$1"; shift
  local rc
  if command -v gtimeout >/dev/null 2>&1; then
    gtimeout --kill-after=2 "$secs" "$@"
    return $?
  fi
  if command -v timeout >/dev/null 2>&1; then
    # Prefer GNU -k; if that flag form is unsupported, fall back once.
    # Do NOT use `cmd || cmd` on the child — a phase exit 1 would re-run it.
    set +e
    timeout -k 2 "$secs" "$@" 2>/dev/null
    rc=$?
    set -e
    # 125 = timeout(1) itself failed (bad options); 126/127 = not executable
    if [ "$rc" -eq 125 ] || [ "$rc" -eq 126 ] || [ "$rc" -eq 127 ]; then
      timeout --kill-after=2 "$secs" "$@"
      return $?
    fi
    return "$rc"
  fi
  # Portable: perl alarm + process group kill
  perl -e '
    use strict; use warnings;
    my $secs = shift @ARGV;
    my $pid = fork();
    die "fork: $!" unless defined $pid;
    if ($pid == 0) {
      setpgrp(0, 0);
      exec @ARGV;
      exit 127;
    }
    $SIG{ALRM} = sub {
      kill "TERM", -$pid;
      select(undef, undef, undef, 1.0);
      kill "KILL", -$pid;
      exit 124;
    };
    alarm $secs;
    waitpid($pid, 0);
    my $code = $? >> 8;
    alarm 0;
    exit $code;
  ' "$secs" "$@"
}

# Generic short SSH to a named host (low-priv stagepaysan or koopa).
# usage: mon_ssh_bash HOST [timeout] <<'EOF' ... EOF
mon_ssh_bash() {
  local host="$1" t="${2:-$SSH_CMD_TIMEOUT}"
  [ -n "$host" ] || return 1
  with_timeout "$t" ssh "${SSH_BASE_OPTS[@]}" "$host" bash -s
}
mon_ssh_ok() {
  local host="$1"
  [ -n "$host" ] || return 1
  with_timeout $((SSH_CONNECT_TIMEOUT + 5)) \
    ssh "${SSH_BASE_OPTS[@]}" "$host" true >/dev/null 2>&1
}

# Pick a working SSH host: KOOPA_SSH first, then KOOPA_SSH_FALLBACKS (koopa-external).
# Sets KOOPA_SSH to the first host that answers. 0 = ok, 1 = none.
KOOPA_SSH_RESOLVED=0
resolve_koopa_ssh() {
  [ "${SKIP_SSH:-0}" = "1" ] && return 1
  if [ "${KOOPA_SSH_RESOLVED}" = "1" ]; then
    return 0
  fi
  local cands=() c f seen=" "
  cands+=("${KOOPA_SSH}")
  # shellcheck disable=SC2086
  for f in ${KOOPA_SSH_FALLBACKS}; do
    case "$seen" in *" $f "*) continue ;; esac
    cands+=("$f")
    seen="$seen$f "
  done
  for c in "${cands[@]}"; do
    if with_timeout $((SSH_CONNECT_TIMEOUT + 5)) \
      ssh "${SSH_BASE_OPTS[@]}" "$c" 'echo ok' >/dev/null 2>&1; then
      if [ "$c" != "${KOOPA_SSH}" ]; then
        # surface once so operators know we used WAN jump
        printf '[INFO]  SSH host %s unreachable — using %s\n' "${KOOPA_SSH}" "$c" >&2 || true
      fi
      KOOPA_SSH="$c"
      KOOPA_SSH_RESOLVED=1
      export KOOPA_SSH
      return 0
    fi
  done
  return 1
}

# Probe: 0 if any koopa SSH host works quickly
koopa_ssh_ok() {
  [ "${SKIP_SSH}" = "1" ] && return 1
  resolve_koopa_ssh
}

# Run remote bash -s with optional stdin script; hard-capped
# usage: koopa_ssh_bash [timeout_secs] <<'EOF' ... EOF
# or:    koopa_ssh_run timeout_secs 'remote command'
koopa_ssh_run() {
  local t="${1:-$SSH_CMD_TIMEOUT}"
  shift
  resolve_koopa_ssh || return 1
  with_timeout "$t" ssh "${SSH_BASE_OPTS[@]}" "${KOOPA_SSH}" "$@"
}

koopa_ssh_bash() {
  local t="${1:-$SSH_CMD_TIMEOUT}"
  resolve_koopa_ssh || return 1
  with_timeout "$t" ssh "${SSH_BASE_OPTS[@]}" "${KOOPA_SSH}" 'bash -s'
}

# stdin → remote python3 - (for metrics load probe)
koopa_ssh_python() {
  local t="${1:-60}"
  resolve_koopa_ssh || return 1
  with_timeout "$t" ssh "${SSH_BASE_OPTS[@]}" "${KOOPA_SSH}" python3 -
}

# ANSI colours — left badge (clear severity) + body label colour + dim detail.
# Off: NO_COLOR=1 or CLICOLOR=0.
#   OK      green badge  · green label
#   INFO    blue badge   · cyan label
#   WARN    yellow badge · yellow label   (never red)
#   ERROR   red badge    · red label
#   BLOCKER magenta badge· magenta label
#   progress  cyan badge = " 42%" + bar fills left→right
if [ "${NO_COLOR:-0}" = "1" ] || [ "${CLICOLOR:-1}" = "0" ]; then
  G= R= Y= C= M= D= W= B= N=
  BG_OK= BG_INFO= BG_WARN= BG_ERR= BG_BLK= BG_SEC= BG_PROG=
  BOX=0
else
  G=$'\e[1;32m'           # green
  R=$'\e[1;31m'           # red
  Y=$'\e[1;33m'           # yellow
  C=$'\e[1;36m'           # cyan
  M=$'\e[1;35m'           # magenta
  D=$'\e[2m'              # dim tid / detail
  W=$'\e[1;37m'           # bold white
  B=$'\e[1m'              # bold
  N=$'\e[0m'              # reset
  # High-contrast left badges (bright white / black on strong bg)
  BG_OK=$'\e[1;97;42m'    # white on green
  BG_INFO=$'\e[1;97;44m'  # white on blue
  BG_WARN=$'\e[1;30;103m' # black on bright yellow — not red
  BG_ERR=$'\e[1;97;41m'   # white on red — errors only
  BG_BLK=$'\e[1;97;45m'   # white on magenta — blockers
  BG_SEC=$'\e[1;97;44m'   # white on blue (section)
  BG_PROG=$'\e[1;30;106m' # black on bright cyan (progress)
  BOX=1
fi

PASS_N=0
FAIL_N=0
WARN_N=0
INFO_N=0
BLOCKERS=()   # human-readable payment/withdraw blockers
ERRORS=()     # all ERROR lines (component scope)

# Grouped test IDs: area.group-NN  (e.g. www.exchange-01, e2e.pay-03)
# plus global run number: #042  (monotonic for the whole ./taler-monitoring.sh run)
#   set_area www              # phase: www | e2e | inside | versions | …
#   set_group exchange        # → www.exchange-01
#   set_group bank            # → www.bank-01
# Without set_group: area-01, area-02, … (flat within area)
# Line shape:  ┌ OK    ┐ #003  www.exchange-02  label · detail
TEST_AREA=""
TEST_GROUP=""
TEST_N=0
LAST_TID=""
# Global / progress: may continue across check_*.sh processes via TALER_MON_STATE
GLOBAL_N="${GLOBAL_N:-0}"
LAST_GLOBAL=""
PROGRESS_DONE="${PROGRESS_DONE:-0}"
PROGRESS_TOTAL="${PROGRESS_TOTAL:-0}"
PROGRESS_SHOW_EVERY="${PROGRESS_SHOW_EVERY:-8}"
PROGRESS_LAST_SHOWN="${PROGRESS_LAST_SHOWN:-0}"
_mon_state_load() {
  [ -n "${TALER_MON_STATE:-}" ] && [ -f "${TALER_MON_STATE}" ] || return 0
  # shellcheck disable=SC1090
  . "${TALER_MON_STATE}"
}
_mon_state_save() {
  [ -n "${TALER_MON_STATE:-}" ] || return 0
  {
    printf 'GLOBAL_N=%s\n' "$GLOBAL_N"
    printf 'PROGRESS_DONE=%s\n' "$PROGRESS_DONE"
    printf 'PROGRESS_TOTAL=%s\n' "$PROGRESS_TOTAL"
    printf 'PROGRESS_LAST_SHOWN=%s\n' "$PROGRESS_LAST_SHOWN"
  } >"${TALER_MON_STATE}"
}
_mon_state_load
# Per-group counters so re-entering www.exchange after perf continues NN
# (shell vars TEST_CNT_<area>_<group>).
_tid_key() {
  # $1=area $2=group → safe identifier
  printf 'TEST_CNT_%s_%s' "$1" "$2" | tr -c 'A-Za-z0-9_' '_'
}
_tid_save() {
  [ -z "${TEST_AREA:-}" ] || [ -z "${TEST_GROUP:-}" ] && return 0
  local k
  k=$(_tid_key "$TEST_AREA" "$TEST_GROUP")
  eval "$k=\$TEST_N"
}
_tid_load() {
  local k
  k=$(_tid_key "$TEST_AREA" "$1")
  eval "TEST_N=\${$k:-0}"
}
set_area() {
  # leave previous group counter saved
  _tid_save
  TEST_AREA="$1"
  TEST_GROUP=""
  TEST_N=0
  LAST_TID=""
}
# Start a logical sub-group. Short stable names:
#   exchange bank merchant perf stats landing paivana
#   prereq wallet atm settle pay shop dig load report
#   ssh caddy outside inside compare withdraw
# Counter continues if the same group is re-entered later in the area.
# Prints a compact group chip so log + issue text map cleanly (www.bank-03).
set_group() {
  local g="$1"
  # no-op if same group already active (e.g. inside emit loop)
  if [ "$g" = "${TEST_GROUP:-}" ] && [ -n "$g" ]; then
    return 0
  fi
  _tid_save
  TEST_GROUP="$g"
  LAST_TID=""
  if [ -z "${TEST_AREA:-}" ] || [ -z "$g" ]; then
    TEST_N=0
    return 0
  fi
  _tid_load "$g"
  local tag="${TEST_AREA}.${g}"
  if [ "${BOX:-0}" = "1" ]; then
    # cyan-outline group chip: ┌ www.exchange ┐
    printf '%s%s┌ %s ┐%s\n' "$D" "$C" "$tag" "$N"
  else
    printf -- '-- %s --\n' "$tag"
  fi
  # show progress when entering a new group (if totals known)
  _progress_maybe_show 1
}
set_progress_total() {
  # Optional: expected number of numbered checks in this run.
  # PROGRESS_TOTAL=0 → no percent, only "done=N".
  # Does not reset GLOBAL_N / PROGRESS_DONE if already mid-run (state file).
  local n="${1:-0}"
  # Never shrink below already completed work (re-estimate mid-run safe)
  if [ "${PROGRESS_DONE:-0}" -gt 0 ] && [ "$n" -gt 0 ] && [ "$n" -lt "$PROGRESS_DONE" ]; then
    n=$PROGRESS_DONE
  fi
  PROGRESS_TOTAL="$n"
  if [ "${PROGRESS_DONE:-0}" -eq 0 ]; then
    PROGRESS_LAST_SHOWN=0
  fi
  _mon_state_save
}
add_progress_total() {
  local n="${1:-0}"
  PROGRESS_TOTAL=$((PROGRESS_TOTAL + n))
  _mon_state_save
}
# When the global estimate was short, grow total just enough so done≤total.
# Never shrink. Mid-run headroom is small and monotonic (stable N in done/N).
_progress_rebalance() {
  [ "${PROGRESS_TOTAL:-0}" -gt 0 ] || return 0
  [ "${PROGRESS_DONE:-0}" -gt 0 ] || return 0
  if [ "$PROGRESS_DONE" -gt "$PROGRESS_TOTAL" ]; then
    # + max(8, 5% of done) so we do not snap to 100% then jump again next check
    local head=$((PROGRESS_DONE / 20))
    [ "$head" -lt 8 ] && head=8
    PROGRESS_TOTAL=$((PROGRESS_DONE + head))
    _mon_state_save
  fi
}
# Snap total to actual done — only at whole-run end (not after each phase).
progress_finish() {
  [ "${PROGRESS_OFF:-0}" = "1" ] && return 0
  [ "${PROGRESS_DONE:-0}" -gt 0 ] || return 0
  if [ "${PROGRESS_TOTAL:-0}" -ne "$PROGRESS_DONE" ]; then
    PROGRESS_TOTAL=$PROGRESS_DONE
    _mon_state_save
  fi
  _progress_bar_line "$PROGRESS_DONE" "$PROGRESS_TOTAL"
  if [ "${GLOBAL_N:-0}" -gt 0 ]; then
    printf -- '%s %s %d/%d (#001…#%03d)%s\n' \
      "$D" "$(i18n_text 'global checks:')" \
      "$PROGRESS_DONE" "$PROGRESS_TOTAL" "$GLOBAL_N" "$N"
  fi
}
_progress_bar_line() {
  # Format (grows left → right; badge = percent):
  #   ┌  42% ┐ ████████░░░░░░░░░░░░░░░░  31/74
  # done/total = global numbered checks so far / global expected total
  local done="$1" total="$2" width=28 pct=0 filled empty i bar pct_lab
  # Defensive: never display done > total
  if [ "$total" -gt 0 ] && [ "$done" -gt "$total" ]; then
    total=$done
  fi
  if [ "$total" -gt 0 ]; then
    # integer percent; while mid-run past a short estimate, cap display < 100%
    pct=$((done * 100 / total))
    [ "$pct" -gt 100 ] && pct=100
    if [ "$done" -lt "$total" ] && [ "$pct" -ge 100 ]; then
      pct=99
    fi
    # fill cells from the left (progress moves rightward as filled grows)
    filled=$((done * width / total))
    [ "$filled" -gt "$width" ] && filled=$width
    # show at least 1 block once any work done (unless 0%)
    if [ "$done" -gt 0 ] && [ "$filled" -eq 0 ]; then
      filled=1
    fi
    # at 100% fill complete bar
    if [ "$done" -ge "$total" ]; then
      filled=$width
      pct=100
    fi
    empty=$((width - filled))
    bar=""
    i=0
    while [ "$i" -lt "$filled" ]; do bar="${bar}█"; i=$((i + 1)); done
    i=0
    while [ "$i" -lt "$empty" ]; do bar="${bar}░"; i=$((i + 1)); done
    pct_lab=$(printf '%3d%%' "$pct")
    if [ "${BOX:-0}" = "1" ]; then
      # badge = percent; bar grows ░→█ left to right; N/M = global check count
      printf '%s┌%s┐%s %s%s%s  %s%d/%d%s\n' \
        "$BG_PROG" "$pct_lab" "$N" \
        "$C" "$bar" "$N" \
        "$D" "$done" "$total" "$N"
    else
      printf -- '%s%4s%s %s  %d/%d\n' \
        "$C" "$pct_lab" "$N" "$bar" "$done" "$total"
    fi
  else
    if [ "${BOX:-0}" = "1" ]; then
      printf '%s┌  …  ┐%s %s%d/?%s (set PROGRESS_TOTAL= for global %%)\n' \
        "$BG_PROG" "$N" "$D" "$done" "$N"
    else
      printf -- '%s%d/?%s (set PROGRESS_TOTAL= for global %%)\n' "$D" "$done" "$N"
    fi
  fi
}
_progress_maybe_show() {
  local force="${1:-0}"
  [ "${PROGRESS_OFF:-0}" = "1" ] && return 0
  [ "$PROGRESS_DONE" -le 0 ] && [ "$force" != "1" ] && return 0
  _progress_rebalance
  if [ "$force" = "1" ] || \
     [ $((PROGRESS_DONE - PROGRESS_LAST_SHOWN)) -ge "$PROGRESS_SHOW_EVERY" ] || \
     { [ "$PROGRESS_TOTAL" -gt 0 ] && [ "$PROGRESS_DONE" -ge "$PROGRESS_TOTAL" ]; }; then
    _progress_bar_line "$PROGRESS_DONE" "$PROGRESS_TOTAL"
    PROGRESS_LAST_SHOWN=$PROGRESS_DONE
  fi
}
# Assign next id into LAST_TID (must not run in a subshell).
_take_tid() {
  LAST_TID=""
  LAST_GLOBAL=""
  if [ -z "${TEST_AREA:-}" ]; then
    return
  fi
  # Global monotonic number for the whole monitoring run (#001 …)
  GLOBAL_N=$((GLOBAL_N + 1))
  LAST_GLOBAL=$(printf '#%03d' "$GLOBAL_N")
  TEST_N=$((TEST_N + 1))
  if [ -n "${TEST_GROUP:-}" ]; then
    LAST_TID=$(printf '%s.%s-%02d' "$TEST_AREA" "$TEST_GROUP" "$TEST_N")
    _tid_save
  else
    LAST_TID=$(printf '%s-%02d' "$TEST_AREA" "$TEST_N")
  fi
  PROGRESS_DONE=$((PROGRESS_DONE + 1))
  _progress_rebalance
  _mon_state_save
  _progress_maybe_show 0
}
# Dim ids: "#003  www.exchange-01  " or empty
_fmt_tid() {
  if [ -n "${LAST_GLOBAL:-}" ]; then
    printf '%s%s%s ' "$D" "$LAST_GLOBAL" "$N"
  fi
  if [ -n "${LAST_TID:-}" ]; then
    printf '%s%s%s  ' "$D" "$LAST_TID" "$N"
  fi
}
# Boxed badge cell: ┌ OK     ┐ with filled bg (tag left-padded, width 7 for BLOCKER)
# $1=badge style  $2=tag text
_fmt_badge() {
  local badge="$1" tag="$2" inner
  inner=$(printf -- '%-7s' "$tag")
  if [ "${BOX:-0}" = "1" ]; then
    printf '%s┌ %s┐%s' "$badge" "$inner" "$N"
  else
    printf '%s[ %s]%s' "$badge" "$inner" "$N"
  fi
}
# One concrete line: ┌ OK    ┐ tid  label  ·  detail
# $1=badge style  $2=tag text  $3=label colour  $4=label  $5=detail
_msg_line() {
  local badge="$1" tag="$2" lcol="$3" label="$4" detail="${5:-}"
  # i18n: tags + free text (en default; fr for FrancPaysan)
  tag=$(i18n_tag "$tag")
  label=$(i18n_text "$label")
  [ -n "$detail" ] && detail=$(i18n_text "$detail")
  if [ -n "$detail" ]; then
    printf -- '%s %s%s%s%s %s·%s %s%s%s\n' \
      "$(_fmt_badge "$badge" "$tag")" "$(_fmt_tid)" "$lcol" "$label" "$N" "$D" "$N" "$D" "$detail" "$N"
  else
    printf -- '%s %s%s%s%s\n' \
      "$(_fmt_badge "$badge" "$tag")" "$(_fmt_tid)" "$lcol" "$label" "$N"
  fi
}

ok() {
  # ok "what is good" ["concrete evidence: HTTP 200 · 12ms · …"]
  local label="$1" detail="${2:-}"
  _take_tid
  _msg_line "$BG_OK" "OK" "$G" "$label" "$detail"
  PASS_N=$((PASS_N + 1))
}
# component-scoped error: err bank "what failed" "why / HTTP / path"
err() {
  local comp="$1" msg="$2" detail="${3:-}"
  _take_tid
  _msg_line "$BG_ERR" "ERROR" "$R" "${comp}: ${msg}" "$detail"
  FAIL_N=$((FAIL_N + 1))
  ERRORS+=("${LAST_TID:+$LAST_TID }[$comp] $msg${detail:+ · $detail}")
}
# fail "what failed" ["why / HTTP code / path"]
fail() {
  local label="$1" detail="${2:-}"
  _take_tid
  _msg_line "$BG_ERR" "ERROR" "$R" "$label" "$detail"
  FAIL_N=$((FAIL_N + 1))
  ERRORS+=("${LAST_TID:+$LAST_TID }$label${detail:+ · $detail}")
}
warn() {
  # warn "what is soft-bad" ["why still ok to continue"]
  # warn component "what" "why"
  # Yellow only — never red (red = ERROR / BLOCKER path)
  local a1="${1:-}" a2="${2:-}" a3="${3:-}"
  local head detail
  _take_tid
  if [ -n "$a3" ]; then
    head="${a1}: ${a2}"
    detail="$a3"
  elif [ -n "$a2" ]; then
    head="$a1"
    detail="$a2"
  else
    head="$a1"
    detail=""
  fi
  _msg_line "$BG_WARN" "WARN" "$Y" "$head" "$detail"
  WARN_N=$((WARN_N + 1))
}
info() {
  # info "topic" ["concrete fact / value / next step"]
  local label="$1" detail="${2:-}"
  _take_tid
  _msg_line "$BG_INFO" "INFO" "$C" "$label" "$detail"
  INFO_N=$((INFO_N + 1))
}
blocker() {
  # Hard stop on pay/withdraw path: blocker "step" "why it cannot continue"
  local step="$1" msg="$2"
  _take_tid
  _msg_line "$BG_BLK" "BLOCKER" "$M" "${step}" "$msg"
  BLOCKERS+=("${LAST_TID:+$LAST_TID }[$step] $msg")
  FAIL_N=$((FAIL_N + 1))
  ERRORS+=("BLOCKER ${LAST_TID:+$LAST_TID }[$step] $msg")
}
section() {
  # Boxed section header (3 lines when colour on)
  local title
  title=$(i18n_text "$*")
  local w=${#title}
  [ "$w" -lt 24 ] && w=24
  [ "$w" -gt 56 ] && w=56
  local pad line i
  pad=$(printf -- "%-${w}s" "$title")
  if [ "${BOX:-0}" = "1" ]; then
    line=""
    i=0
    while [ "$i" -lt $((w + 2)) ]; do
      line="${line}═"
      i=$((i + 1))
    done
    printf -- '\n%s╔%s╗%s\n' "$BG_SEC" "$line" "$N"
    printf -- '%s║%s %s%s%s %s║%s\n' "$BG_SEC" "$N" "$B" "$pad" "$N" "$BG_SEC" "$N"
    printf -- '%s╚%s╝%s\n' "$BG_SEC" "$line" "$N"
  else
    printf -- '\n== %s ==\n' "$title"
  fi
}

summary() {
  local blk_n=${#BLOCKERS[@]}
  echo ""
  # Phase progress snapshot — keep GLOBAL total (do not snap N to phase-local done).
  # Snapping here made mid-run bars like 34/34 then 38/47. Whole-run snap: progress_finish.
  if [ "${PROGRESS_OFF:-0}" != "1" ] && [ "${PROGRESS_DONE:-0}" -gt 0 ]; then
    if [ "${PROGRESS_FINAL:-0}" = "1" ]; then
      # last phase / explicit final: done/total exact
      if [ "$PROGRESS_TOTAL" -gt 0 ] && [ "$PROGRESS_DONE" -ne "$PROGRESS_TOTAL" ]; then
        PROGRESS_TOTAL=$PROGRESS_DONE
        _mon_state_save
      fi
    fi
    _progress_rebalance
    _progress_bar_line "$PROGRESS_DONE" "$PROGRESS_TOTAL"
  fi
  if [ "$GLOBAL_N" -gt 0 ]; then
    # Always show global position: current # / expected total (if known)
    if [ "${PROGRESS_TOTAL:-0}" -gt 0 ]; then
      printf -- '%s %s #001…#%03d · %d/%d %s%s\n' \
        "$D" "$(i18n_text 'numbered checks:')" "$GLOBAL_N" \
        "$PROGRESS_DONE" "$PROGRESS_TOTAL" \
        "$(i18n_text '(global done/total)')" "$N"
    else
      printf -- '%s %s #001…#%03d%s\n' "$D" "$(i18n_text 'numbered checks this run:')" "$GLOBAL_N" "$N"
    fi
  fi
  if [ "$blk_n" -gt 0 ]; then
    if [ "${BOX:-0}" = "1" ]; then
      printf -- '%s┌ %s ┐%s\n' "$BG_BLK" "$(i18n_text 'BLOCKERS · pay/withdraw cannot finish')" "$N"
    else
      printf -- '%s--- %s ---%s\n' "$M" "$(i18n_text 'BLOCKERS (pay/withdraw cannot finish)')" "$N"
    fi
    local b
    for b in "${BLOCKERS[@]}"; do
      printf -- '  %s•%s %s%s%s\n' "$M" "$N" "$W" "$b" "$N"
    done
  fi
  if [ "${#ERRORS[@]}" -gt 0 ] && [ "$blk_n" -lt "${#ERRORS[@]}" ]; then
    if [ "${BOX:-0}" = "1" ]; then
      printf -- '%s┌ %s ┐%s\n' "$BG_ERR" "$(i18n_text 'ERRORS · failed checks')" "$N"
    else
      printf -- '%s--- %s ---%s\n' "$R" "$(i18n_text 'ERRORS (failed checks)')" "$N"
    fi
    local e
    for e in "${ERRORS[@]}"; do
      case "$e" in BLOCKER*) continue ;; esac
      printf -- '  %s•%s %s%s%s\n' "$R" "$N" "$W" "$e" "$N"
    done
  fi

  # Coloured totals — same severity badges as check lines (always; NO_COLOR blanks ANSI)
  if [ "${BOX:-0}" = "1" ]; then
    printf -- '\n%s┌ %s ┐%s\n' "$BG_SEC" "$(i18n_tag SUMMARY)" "$N"
    _sum_badge() { # $1=bg $2=tag $3=fg $4=n
      local _tg
      _tg=$(i18n_tag "$2")
      printf -- '  %s┌ %-5s┐%s %s%4d%s\n' "$1" "$_tg" "$N" "$3" "$4" "$N"
    }
    _sum_badge "$BG_OK" "OK" "$G" "$PASS_N"
    [ "$FAIL_N" -gt 0 ] && _sum_badge "$BG_ERR" "ERROR" "$R" "$FAIL_N"
    [ "$WARN_N" -gt 0 ] && _sum_badge "$BG_WARN" "WARN" "$Y" "$WARN_N"
    [ "$INFO_N" -gt 0 ] && _sum_badge "$BG_INFO" "INFO" "$C" "$INFO_N"
    [ "$blk_n" -gt 0 ] && _sum_badge "$BG_BLK" "BLOCK" "$M" "$blk_n"
  else
    printf -- '\n[ %s ]\n' "$(i18n_tag SUMMARY)"
    printf -- '  [ %-5s ] %s%4d%s\n' "$(i18n_tag OK)" "$G" "$PASS_N" "$N"
    [ "$FAIL_N" -gt 0 ] && printf -- '  [ %-5s ] %s%4d%s\n' "$(i18n_tag ERROR)" "$R" "$FAIL_N" "$N"
    [ "$WARN_N" -gt 0 ] && printf -- '  [ %-5s ] %s%4d%s\n' "$(i18n_tag WARN)" "$Y" "$WARN_N" "$N"
    [ "$INFO_N" -gt 0 ] && printf -- '  [ %-5s ] %s%4d%s\n' "$(i18n_tag INFO)" "$C" "$INFO_N" "$N"
    [ "$blk_n" -gt 0 ] && printf -- '  [ %-5s ] %s%4d%s\n' "$(i18n_tag BLOCK)" "$M" "$blk_n" "$N"
  fi
  # one-line rollup (bold label, severity-coloured counts)
  printf -- '  %stotals:%s %s%d OK%s' "$B" "$N" "$G" "$PASS_N" "$N"
  [ "$FAIL_N" -gt 0 ] && printf -- ' · %s%d ERROR%s' "$R" "$FAIL_N" "$N"
  [ "$WARN_N" -gt 0 ] && printf -- ' · %s%d WARN%s' "$Y" "$WARN_N" "$N"
  [ "$INFO_N" -gt 0 ] && printf -- ' · %s%d INFO%s' "$C" "$INFO_N" "$N"
  [ "$blk_n" -gt 0 ] && printf -- ' · %s%d BLOCKER%s' "$M" "$blk_n" "$N"
  printf '\n'
  # overall verdict
  if [ "$FAIL_N" -eq 0 ] && [ "$blk_n" -eq 0 ] && [ "$WARN_N" -eq 0 ]; then
    if [ "${BOX:-0}" = "1" ]; then
      printf -- '  %s┌ OK    ┐%s %sall clear%s\n' "$BG_OK" "$N" "$G" "$N"
    else
      printf -- '  %s[ OK    ] all clear%s\n' "$G" "$N"
    fi
  elif [ "$FAIL_N" -eq 0 ] && [ "$blk_n" -eq 0 ]; then
    if [ "${BOX:-0}" = "1" ]; then
      printf -- '  %s┌ WARN  ┐%s %swarnings only (no hard fail)%s\n' "$BG_WARN" "$N" "$Y" "$N"
    else
      printf -- '  %s[ WARN  ] warnings only (no hard fail)%s\n' "$Y" "$N"
    fi
  else
    _fail_msg=$(i18n_text 'failed — see list above')
    if [ "${BOX:-0}" = "1" ]; then
      printf -- '  %s┌ ERROR ┐%s %s%s%s\n' "$BG_ERR" "$N" "$R" "$_fail_msg" "$N"
    else
      printf -- '  %s[ ERROR ] %s%s\n' "$R" "$_fail_msg" "$N"
    fi
  fi
  [ "$FAIL_N" -eq 0 ]
}

# ---------------------------------------------------------------------------
# Disk space on hosts / containers under test
# WARN when tight, ERROR when full / critically low
#   DISK_WARN_USED_PCT=85   # free below 15% → WARN
#   DISK_ERR_USED_PCT=95    # free below 5%  → ERROR
#   DISK_ERR_FREE_BYTES=0   # free == 0 always ERROR
# ---------------------------------------------------------------------------
: "${DISK_WARN_USED_PCT:=85}"
: "${DISK_ERR_USED_PCT:=95}"

# Parse one POSIX `df -P` body line (no header): fs size used avail capacity mount
# size/used/avail in 1K-blocks when using df -Pk
_mon_disk_eval_line() {
  local where="$1" fs="$2" size="$3" used="$4" avail="$5" cap="$6" mnt="$7"
  local pct label detail
  pct=${cap%%%}
  # non-numeric capacity → skip
  case "$pct" in
    ''|*[!0-9]*) return 0 ;;
  esac
  label="disk ${where} ${mnt}"
  detail="fs=$fs size_1k=$size used_1k=$used avail_1k=$avail use=${pct}%"
  if [ "$avail" = "0" ] || [ "$pct" -ge 100 ]; then
    err "disk" "${where} ${mnt} FULL / overflow" "$detail"
    return 1
  fi
  if [ "$pct" -ge "${DISK_ERR_USED_PCT}" ]; then
    err "disk" "${where} ${mnt} critically low free space (≥${DISK_ERR_USED_PCT}% used)" "$detail"
    return 1
  fi
  if [ "$pct" -ge "${DISK_WARN_USED_PCT}" ]; then
    warn "disk" "${where} ${mnt} free space tight (≥${DISK_WARN_USED_PCT}% used)" "$detail"
    return 0
  fi
  ok "$label" "$detail"
  return 0
}

# Report all filesystems from `df -P` / `df -Pk` output (with header).
# $1 = where label (host, container:name, ssh:host)
# $2 = full df text
mon_disk_report_df() {
  local where="$1" text="$2" line fs size used avail cap mnt rest ec=0
  [ -n "$text" ] || {
    warn "disk" "${where}: no df output"
    return 0
  }
  while IFS= read -r line || [ -n "$line" ]; do
    [ -n "$line" ] || continue
    case "$line" in
      Filesystem*|Filesystem*) continue ;;
    esac
    # df -P: Filesystem 1024-blocks Used Available Capacity Mounted on
    # shellcheck disable=SC2086
    set -- $line
    [ "$#" -ge 6 ] || continue
    fs=$1
    size=$2
    used=$3
    avail=$4
    cap=$5
    shift 5
    mnt=$*
    # skip special/pseudo if tiny and not root-ish
    case "$fs" in
      tmpfs|devtmpfs|overlay|shm|nsfs|proc|sysfs|cgroup*) 
        # still check root-like mounts that fill (overlay / in containers)
        case "$mnt" in
          /|/var|/var/*|/home|/home/*|/data|/mnt/*) ;;
          *) continue ;;
        esac
        ;;
    esac
    if ! _mon_disk_eval_line "$where" "$fs" "$size" "$used" "$avail" "$cap" "$mnt"; then
      ec=1
    fi
  done <<<"$text"
  return "$ec"
}

# Local host: important mounts
mon_disk_check_host() {
  local where text
  where="${1:-host}"
  text=""
  text=$(df -Pk / /var /home /tmp 2>/dev/null | awk 'NR==1 || !seen[$1,$6]++' || true)
  # fallback whole table
  if [ -z "$text" ]; then
    text=$(df -Pk 2>/dev/null || true)
  fi
  mon_disk_report_df "$where" "$text"
}

# Run df inside podman container
mon_disk_check_podman() {
  local cname="$1" text
  local bin="${2:-podman}"
  text=$("$bin" exec "$cname" df -Pk / /var /tmp 2>/dev/null || "$bin" exec "$cname" df -Pk 2>/dev/null || true)
  mon_disk_report_df "ctr:${cname}" "$text"
}

# df text already collected remotely
mon_disk_check_remote_text() {
  local where="$1" text="$2"
  mon_disk_report_df "$where" "$text"
}

http_code() {
  local url="$1"; shift
  curl -skS --max-redirs 0 -m "${TIMEOUT}" -o /dev/null -w '%{http_code}' "$@" "$url" 2>/dev/null || echo 000
}

http_body() {
  local url="$1" out="$2"; shift 2
  curl -skS --max-redirs 0 -m "${TIMEOUT}" -o "$out" -w '%{http_code}' "$@" "$url" 2>/dev/null || echo 000
}

# ---------------------------------------------------------------------------
# Currency unit map checks (wallet codec: alt_unit_names must include "0")
# ---------------------------------------------------------------------------
# Returns 0 if JSON body at $1 has usable alt_unit_names.
# Supports:
#   - exchange/bank: currency_specification.alt_unit_names
#   - merchant: currencies.<CODE>.alt_unit_names for each code
# Optional $2 = required currency code for currency_specification.currency
json_has_alt_unit_names() {
  local file="$1" want_cur="${2:-}"
  python3 - "$file" "$want_cur" <<'PY'
import json, sys
path, want = sys.argv[1], sys.argv[2]
try:
    d = json.load(open(path))
except Exception as e:
    print(f"json-error: {e}")
    sys.exit(2)

def check_au(au, label):
    if not isinstance(au, dict) or not au:
        print(f"{label}: missing/empty alt_unit_names")
        return False
    if "0" not in au or not str(au.get("0") or "").strip():
        print(f"{label}: alt_unit_names missing non-empty key \"0\" (have {sorted(au.keys())})")
        return False
    print(f"{label}: alt_unit_names ok (0={au.get('0')!r}, n={len(au)})")
    return True

ok = True
cs = d.get("currency_specification")
if isinstance(cs, dict):
    if want and cs.get("currency") and cs.get("currency") != want:
        print(f"currency_specification.currency={cs.get('currency')!r} want {want!r}")
        ok = False
    if not check_au(cs.get("alt_unit_names"), "currency_specification"):
        ok = False
elif "currency_specification" in d:
    print("currency_specification: not an object")
    ok = False

curs = d.get("currencies")
if isinstance(curs, dict) and curs:
    for code, spec in curs.items():
        if not isinstance(spec, dict):
            print(f"currencies.{code}: not an object")
            ok = False
            continue
        if not check_au(spec.get("alt_unit_names"), f"currencies.{code}"):
            ok = False

if not isinstance(cs, dict) and not (isinstance(curs, dict) and curs):
    # neither shape — fail
    print("no currency_specification or currencies map")
    ok = False

sys.exit(0 if ok else 1)
PY
}

# Check one exchange base URL's /config for alt_unit_names.
# $1=label $2=base_url $3=expected currency (optional) $4=strict(1) or soft(0)
check_exchange_alt_units() {
  local label="$1" base="$2" want_cur="${3:-}" strict="${4:-1}"
  local f code
  base="${base%/}"
  f=$(mktemp)
  code=$(http_body "${base}/config" "$f")
  if [ "$code" != "200" ]; then
    rm -f "$f"
    if [ "$strict" = "1" ]; then
      fail "$label /config" "HTTP $code ($base)"
    else
      warn "$label /config" "HTTP $code ($base)"
    fi
    return
  fi
  local out ec
  set +e
  out=$(json_has_alt_unit_names "$f" "$want_cur" 2>&1)
  ec=$?
  set -e
  rm -f "$f"
  if [ "$ec" -eq 0 ]; then
    ok "$label alt_unit_names" "$(echo "$out" | tr '\n' '; ' | sed 's/; $//')"
  else
    if [ "$strict" = "1" ]; then
      fail "$label alt_unit_names" "$(echo "$out" | tr '\n' '; ' | sed 's/; $//')"
    else
      warn "$label alt_unit_names" "$(echo "$out" | tr '\n' '; ' | sed 's/; $//')"
    fi
  fi
}

# From merchant /config JSON file: walk exchanges[] and check each base_url/config.
# Local stack hosts (hacktivism.ch or $EXCHANGE_PUBLIC host) are strict; others soft.
check_merchant_listed_exchanges_alt_units() {
  local mer_json="$1"
  local list
  list=$(python3 - "$mer_json" <<'PY'
import json, sys
d = json.load(open(sys.argv[1]))
for e in d.get("exchanges") or []:
    if not isinstance(e, dict):
        continue
    u = (e.get("base_url") or e.get("url") or "").rstrip("/")
    c = e.get("currency") or ""
    if u:
        print(f"{c}\t{u}")
PY
)
  if [ -z "$list" ]; then
    fail "merchant exchanges[]" "empty — no exchanges to check for alt_unit_names"
    return
  fi
  local line cur url strict host
  while IFS=$'\t' read -r cur url; do
    [ -n "$url" ] || continue
    host="${url#https://}"; host="${host#http://}"; host="${host%%/*}"
    strict=1
    case "$host" in
      *hacktivism.ch) strict=1 ;;
      *)
        # foreign exchange (e.g. taler-ops) — soft unless it is our configured EXCHANGE_PUBLIC
        if [ "$url" = "${EXCHANGE_PUBLIC}" ] || [ "$url" = "${EXCHANGE_PUBLIC}/" ]; then
          strict=1
        else
          strict=0
        fi
        ;;
    esac
    check_exchange_alt_units "exchange ${cur:-?} ${host}" "$url" "$cur" "$strict"
  done <<<"$list"
}

# Live bank/merchant passwords: sibling **koopa-admin-secrets** (never in admin-log).
# Override: SECRETS_ROOT=/path/to/koopa-admin-secrets/koopa/host-root
#           or KOOPA_ADMIN_SECRETS=/path/to/koopa-admin-secrets
SECRETS_ROOT="${SECRETS_ROOT:-}"
_secrets_search_log() { :; } # placeholder if we later want debug
if [ -z "$SECRETS_ROOT" ]; then
  _mon_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
  _admin_log="$(cd "${_mon_dir}/../.." && pwd)"
  # Prefer explicit env pointing at the secrets *repo* root
  if [ -n "${KOOPA_ADMIN_SECRETS:-}" ] && [ -d "${KOOPA_ADMIN_SECRETS}/koopa/host-root/taler-bank" ]; then
    SECRETS_ROOT="${KOOPA_ADMIN_SECRETS}/koopa/host-root"
  fi
fi
if [ -z "$SECRETS_ROOT" ]; then
  _mon_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
  _admin_log="$(cd "${_mon_dir}/../.." && pwd)"
  for d in \
    "${_admin_log}/../koopa-admin-secrets/koopa/host-root" \
    "${_admin_log}/../../koopa-admin-secrets/koopa/host-root" \
    "${HOME}/taler/src/koopa-admin-secrets/koopa/host-root" \
    "${HOME}/src/koopa/koopa-admin-secrets/koopa/host-root" \
    "${HOME}/koopa-admin-secrets/koopa/host-root" \
    "/Users/newkamek/src/koopa/koopa-admin-secrets/koopa/host-root" \
    "$(cd "${_admin_log}/../.." 2>/dev/null && pwd)/koopa-admin-secrets/koopa/host-root"
  do
    # resolve .. without requiring the dir to exist first for cd
    if [ -d "$d/taler-bank" ]; then
      SECRETS_ROOT=$(cd "$d" && pwd)
      break
    fi
  done
  unset _mon_dir _admin_log d
fi

read_secret() {
  local rel="$1" base val=""
  base=$(basename "$rel")
  if [ -n "${SECRETS_ROOT:-}" ]; then
    if [ -f "${SECRETS_ROOT}/${rel}" ]; then
      tr -d '\n\r' <"${SECRETS_ROOT}/${rel}"
      return 0
    fi
    # also accept flat layout under host-root/
    if [ -f "${SECRETS_ROOT}/${base}" ]; then
      tr -d '\n\r' <"${SECRETS_ROOT}/${base}"
      return 0
    fi
  fi
  # Optional: copy under ~/.config/taler-landing/ (landing-stats style)
  if [ -f "${HOME}/.config/taler-landing/${base}" ]; then
    tr -d '\n\r' <"${HOME}/.config/taler-landing/${base}"
    return 0
  fi
  # Live on koopa host /root (same basenames as deploy)
  if koopa_ssh_ok; then
    val=$(koopa_ssh_run 12 "tr -d '\\n\\r' </root/${base} 2>/dev/null || true" 2>/dev/null || true)
    if [ -n "$val" ]; then
      printf '%s' "$val"
      return 0
    fi
    # container path used by some installs
    val=$(koopa_ssh_run 12 \
      "podman exec taler-hacktivism-bank tr -d '\\n\\r' </root/${base} 2>/dev/null || true" 2>/dev/null || true)
    if [ -n "$val" ]; then
      printf '%s' "$val"
      return 0
    fi
  fi
  return 1
}

# Human hint when secrets missing (e2e prereq)
secrets_hint() {
  cat <<EOF
Prefer a local secrets file (not committed):
  cp secrets.env.example secrets.env
  \$EDITOR secrets.env
Or set SECRETS_ROOT=\$HOME/src/koopa/koopa-admin-secrets/koopa/host-root
Or export E2E_BANK_ADMIN_PASS / E2E_MERCHANT_TOKEN for one shot.
EOF
}

# Load optional secrets.env next to this suite (gitignored). Safe KEY=value only.
# Call once from taler-monitoring.sh after source lib.sh (or any check_*.sh entry).
load_monitoring_secrets_env() {
  local mon_dir f
  mon_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
  f="${MONITORING_SECRETS_ENV:-${mon_dir}/secrets.env}"
  if [ ! -f "$f" ]; then
    return 0
  fi
  # shellcheck disable=SC1090
  set -a
  # Only simple KEY=VALUE lines; ignore comments / blanks
  # shellcheck disable=SC1091
  . "$f"
  set +a
  # Map common aliases → e2e vars if not already set
  : "${E2E_BANK_ADMIN_PASS:=${BANK_ADMIN_PASS:-${BANK_ADMIN_PASSWORD:-}}}"
  : "${E2E_MERCHANT_TOKEN:=${MERCHANT_TOKEN:-${MERCHANT_INSTANCE_PASSWORD:-}}}"
  : "${SECRETS_ROOT:=${KOOPA_SECRETS_HOST_ROOT:-}}"
  if [ -z "${SECRETS_ROOT:-}" ] && [ -n "${KOOPA_ADMIN_SECRETS:-}" ]; then
    if [ -d "${KOOPA_ADMIN_SECRETS}/koopa/host-root/taler-bank" ]; then
      SECRETS_ROOT="${KOOPA_ADMIN_SECRETS}/koopa/host-root"
    fi
  fi
  export E2E_BANK_ADMIN_PASS E2E_MERCHANT_TOKEN SECRETS_ROOT KOOPA_ADMIN_SECRETS
}

find_wallet_cli() {
  # Must return a path suitable for: node "$WALLET_CLI" …
  # Prefer *.mjs / bundled entry; plain /usr/bin/taler-wallet-cli is often a
  # shell wrapper and cannot be passed to node.
  if [ -n "${WALLET_CLI:-}" ] && [ -f "$WALLET_CLI" ]; then
    echo "$WALLET_CLI"; return 0
  fi
  local c cand
  for c in \
    "${HOME}/.local/bin/taler-wallet-cli.mjs" \
    "${HOME}/taler/src/taler-typescript-core/packages/taler-wallet-cli/bin/taler-wallet-cli.mjs" \
    "${HOME}/src/taler-typescript-core/packages/taler-wallet-cli/bin/taler-wallet-cli.mjs" \
    "${HOME}/taler/opt/taler-wallet-cli/usr/lib/taler-wallet-cli/node_modules/taler-wallet-cli/bin/taler-wallet-cli.mjs" \
    /home/hernani/taler/opt/taler-wallet-cli/usr/lib/taler-wallet-cli/node_modules/taler-wallet-cli/bin/taler-wallet-cli.mjs \
    /home/hernani/taler/src/taler-typescript-core/packages/taler-wallet-cli/bin/taler-wallet-cli.mjs \
    /Users/newkamek/src/taler/taler-typescript-core/packages/taler-wallet-cli/bin/taler-wallet-cli.mjs \
    /usr/lib/taler-wallet-cli/node_modules/taler-wallet-cli/bin/taler-wallet-cli.mjs \
    /usr/share/taler-wallet-cli/bin/taler-wallet-cli.mjs
  do
    [ -n "$c" ] && [ -f "$c" ] && { echo "$c"; return 0; }
  done
  # Debian package wrapper → resolve real .mjs
  cand=$(command -v taler-wallet-cli 2>/dev/null || true)
  if [ -n "$cand" ] && [ -f "$cand" ]; then
    if head -1 "$cand" 2>/dev/null | grep -q 'node\|mjs'; then
      # shebang node script or .mjs
      echo "$cand"; return 0
    fi
    # follow symlink into package tree
    if [ -L "$cand" ]; then
      c=$(readlink -f "$cand" 2>/dev/null || true)
      [ -n "$c" ] && [ -f "$c" ] && { echo "$c"; return 0; }
    fi
  fi
  return 1
}